Zephyr Net


Return to the Fighters Anthology Resource Center

Go to the VNFAWING.com Forums
It is currently Fri Mar 29, 2024 09:45 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 4 posts ] 
Author Message
PostPosted: Mon Mar 12, 2012 12:00 pm 
Offline

Joined: Mon Oct 12, 2009 09:25 am
Posts: 544
- The JF-17 Thunder -

Image

Image

Image

Image

Image

Image

Revealed in 1995 as the successor of the cancelled Sino-US Super-7 project, FC-1 (Fighter China-1, max TO weight 12,700kg, max speed M 1.8, service ceiling 16,920m, max weapon load 3,900kg, ferry range 3,480km, combat radius 1,352km, max g load +8.5) is being developed by CAC/611 Institute (with some technical assistance from Russian Mikoyan OKB) as a "medium tech", light weight fighter/ground attack aircraft carrying a relatively cheap price tag (~$20m). As a fighter designed for export, its main customer is expected to be Pakistan who also shares 50% of the total cost (around $150m). It may also compete with second-hand F-16s to seize the market created by the retirement of Mig-21s, Mirage III and F-5s. Currently powered by a Russian RD-93 turbofan (upgraded RD-33, rated 8,795kg with a/b), it may also be powered by a locally produced WS-13 Taishan if it ever enters the service with PLAAF. The A-6 style "V" shaped air-intakes are believed to provide smooth air flow to the engine at high AoA. The fire control radar is thought to be a Chinese KLJ-7 X-band multi-functional PD radar in the initial batches of 8, then subsequently switched to KLJ-10 with a better performance (track 10 engage 2, look-up range 75km, look-down range 45km for RCS=3m2). A European high performance radar (e.g. Italian Vixen 1000ES AESA) has been planned in later batches. Other electronics include an NVG compatible glass cockpit with 3 8"x6" color MFDs, HOTAS, AIFF, 1553B databus and INS/GPS. Weapon load includes both short (PL-5E/PL-9C/AIM-9M) and medium-range AAMs (SD-10A). LGBs (LT-2/LT-3/GBU-16), GPS/INS guided bombs (LS-6), anti-radiation missiles (Brazilian MAR-1) and laser designating pod (WMD-7) can also be carried for ground attack missions, up to 2 C-802A AShMs for anti-ship missions. For self-protection purpose a KG300G ECM pod can be carried. The development schedule of FC-1 was repeatedly delayed caused by various problems, such as lack of funding, the reluctance of western countries to supply advanced avionics, as well as the revised specifications set by PAF to counter the threat from India's LCAs. These specifications included a true BVR attack capability with active radar guided medium-range AAMs (SD-10). However, FC-1's prospect in the domestic market was not very promising, as PLAAF had largely committed to the more advanced J-10 as its new generation fighter along with J-11 and was reluctant to take a large number of FC-1s due to its less advanced design and a Russian engine. After lengthy negotiations, Pakistani government finally signed the contract with CATIC and CAC/611 in 1999 and gave the "go ahead" order to the much delayed project. The development was further accelerated after PAF recommitted the project and confirmed FC-1's technical specifications in detail in February 2001. A full-scale mock-up was quickly constructed. A total of 6 prototypes (01-06) would have been built at CAC. The 01 prototype rolled down the assembly line on May 31, 2003 with two small wing fences. Its maiden flight took place on August 25, 2003. The 03 prototype first flew on April 9, 2004 without the two small wing fences. The 04 prototype was expected to fly by the end of 2005 with full suite of avionics but this was delayed until April 2006 due to several structural modifications. They include new diverterless supersonic inlets (DSI/Bump) similar to those of American F-35 to reduce weight and achieve better performance. A large rectangular-shaped fairing is installed on top of the vertical tailfin which may house ECM equipment. Its flight control includes a Type 634 quadruplex digital FBW in pitch axis and a duplex analog FBW in roll axis. A UV band MAWS has been installed at the root of the vertical tailfin to provide rear hemisphere coverage. Two enlarged F/A-18 style LERX are thought to offer higher AOA as well. The first flight of 04 prototype took place on April 28, 2006, and 06 prototype on September 10, 2006. The first two preproduction JF-17s (Joint Fighter-17, 00 batch/07-101 & 102) were delivered to Pakistan on March 2, 2007, with the nose-tip pitot tube removed. The 01 batch of 6 JF-17s (08-103 -- 08-108) were delivered between March and April 2008. The contract for PAF to acquire 42 JF-17s (mostly assembled by PAC) was singed on March 7, 2009. The first two (09-109 & 110) have been built by CAC. The first JF-17 (09-111) in the batch of 4 assembled by PAC rolled out on November 23, 2009. It was reported in May 2011 that PAF plans to acquire another 50 JF-17s on an "expedited" basis and the negotiation is still ongoing. Besides Pakistan, several Asian and African countries also expressed interest in FC-1, including Egypt, Bangladesh, Iran, Sri Lanka and Azerbaijan. In October 2008 it was rumored that PLAAF might acquire some FC-1s as a low-cost light fighter/attack aircraft to replace its obsolete J-7s and Q-5s but this has not been confirmed. FC-1 passed design appraisal in December 2009. The first taxi test of FC-1 powered by an indigenous WS-13 took place on March 18, 2010. A further improved version (JF-17A/JF-17 Block 2?) featuring an AESA radar, IRST and IFR probe as well as a two-seat trainer version (JF-17B?) are thought to has been proposed and likely be under development as well.


Top
 Profile  
 
PostPosted: Mon Mar 25, 2013 10:12 am 
Offline

Joined: Mon Oct 12, 2009 09:25 am
Posts: 544
Image

Image

Image

Image

Image

Image

Image

First revealed in 1995 as the successor of the cancelled Sino-US Super-7 project, FC-1 (Fighter China-1, max TO weight 12,700kg, max speed M 1.8, service ceiling 16,920m, max weapon load 3,900kg, ferry range 3,480km, combat radius 1,352km, max g load +8.5) is being developed by CAC/611 Institute (with some technical assistance from Russian Mikoyan OKB) as a "medium tech", light weight fighter/ground attack aircraft carrying a relatively cheap price tag (~$20m). As a fighter designed for export, its main customer is expected to be Pakistan who also shares 50% of the total cost (around $150m). It may also compete with second-hand F-16s to seize the market created by the retirement of Mig-21s, Mirage III and F-5s. Currently powered by a Russian RD-93 turbofan (upgraded RD-33, rated 8,795kg with a/b), it may also be powered by a locally produced WS-13 Taishan once the engine is ready. The A-6 style "V" shaped air-intakes are believed to provide smooth air flow to the engine at high AoA. The fire control radar is thought to be a Chinese KLJ-7 X-band multi-functional PD radar (track 10 and engage 2 simultaneously, look-up range 75km, look-down range 45km for RCS=3m2). A European high performance radar (e.g. Italian Vixen 1000ES AESA) has been planned in later batches. Other electronics include an NVG compatible glass cockpit (EFIS) with three 8"x6" color MFDs, HOTAS, AIFF, 1553B data bus and INS/GPS. Weapon load includes both short (PL-5EII/PL-9C/AIM-9M) and medium-range AAMs (SD-10A). LGBs (LT-2/LT-3/GBU-16), GPS/INS guided bombs (LS-6), anti-radiation missiles (Brazilian MAR-1 or Chinese LD-10) and IRST/laser designation pod (WMD-7) can also be carried for ground attack missions. Up to 2 C-802AK AShMs can be carried for anti-ship missions. For high value fixed targets, the new CM-400AKG standoff supersonic ASM can be carried. For self-protection purpose a KG300G ECM pod can be carried. The development schedule of FC-1 was repeatedly delayed caused by various problems, such as lack of funding, the reluctance of western countries to supply advanced avionics, as well as the revised specifications set by PAF to counter the threat from India's LCAs. These specifications included a true BVR attack capability with active radar guided medium-range AAMs (SD-10). However, FC-1's prospect in the domestic market was not very promising, as PLAAF had largely committed to the more advanced J-10 as its new generation fighter along with J-11 and was reluctant to take a large number of FC-1s due to its less advanced design and a Russian engine. After lengthy negotiations, Pakistani government finally signed the contract with CATIC and CAC/611 in 1999 and gave the "go ahead" order to the much delayed project. The development was further accelerated after PAF recommitted the project and confirmed FC-1's technical specifications in detail in February 2001. A full-scale mock-up was quickly constructed. A total of 6 prototypes (01-06) would have been built at CAC. The 01 prototype rolled down the assembly line on May 31, 2003 with two small wing fences. Its maiden flight took place on August 25, 2003. The 03 prototype first flew on April 9, 2004 without the two small wing fences. The 04 prototype was expected to fly by the end of 2005 with full suite of avionics but this was delayed until April 2006 due to several structural modifications. They include new diverterless supersonic inlets (DSI/Bump) similar to those of American F-35 to reduce weight and achieve better performance. A large rectangular-shaped fairing is installed on top of the vertical tailfin which may house ECM equipment. Its flight control includes a Type 634 quadruplex digital FBW in pitch axis and a duplex analog FBW in roll axis. A UV band MAWS has been installed at the root of the vertical tailfin to provide rear hemisphere coverage. Two enlarged F/A-18 style LERX are thought to offer higher AOA as well. The first flight of 04 prototype took place on April 28, 2006, and 06 prototype on September 10, 2006. The first two preproduction JF-17s (Joint Fighter-17, 00 batch/07-101 & 102) were delivered to Pakistan on March 2, 2007, with the nose-tip pitot tube removed. The 01 batch of 6 JF-17s (08-103 -- 08-108) were delivered between March and April 2008. The contract for PAF to acquire 42 JF-17s (mostly assembled by PAC) was singed on March 7, 2009. The first two (09-109 & 110) have been built by CAC. The first JF-17 (09-111) in the batch of 4 assembled by PAC rolled out on November 23, 2009. It was reported in May 2011 that PAF plans to acquire another 50 JF-17s on an "expedited" basis as the production continues. Besides Pakistan, several Asian and African countries also expressed interest in FC-1, including Egypt, Bangladesh, Iran, Sri Lanka and Azerbaijan. FC-1 passed design appraisal in December 2009. The first taxi test of FC-1 powered by an indigenous WS-13 took place on March 18, 2010. A further improved version (JF-17A/JF-17 Block 2?) featuring an AESA radar, IRST and IFR probe has been proposed and is likely to be under development as well. The latest news (December 2012) suggested that Sri Lanka plans to acquire 6 JF-17s starting in 2013.


Top
 Profile  
 
PostPosted: Sat Jul 13, 2013 05:55 am 
Offline

Joined: Mon Oct 12, 2009 09:25 am
Posts: 544
Image

Image

The first two preproduction JF-17s (Joint Fighter-17, 00 batch/07-101 & 102) were delivered to Pakistan on March 2, 2007, with the nose-tip pitot tube removed. The 01 batch of 6 JF-17s (08-103 -- 08-108) were delivered between March and April 2008. The contract for PAF to acquire 42 JF-17s (mostly assembled by PAC) was singed on March 7, 2009. The first two (09-109 & 110) have been built by CAC. The first JF-17 (09-111) in the batch of 4 assembled by PAC rolled out on November 23, 2009. It was reported in May 2011 that PAF plans to acquire another 50 JF-17s on an "expedited" basis as the production continues. Besides Pakistan, several Asian and African countries also expressed interest in FC-1, including Egypt, Bangladesh, Iran, Sri Lanka and Azerbaijan. FC-1 passed design appraisal in December 2009. The first taxi test of FC-1 powered by an indigenous WS-13 took place on March 18, 2010. A further improved version (JF-17A/JF-17 Block 2?) featuring an AESA radar, IRST and IFR probe has been proposed and is likely to be under development as well. Recent news (December 2012) suggested that Sri Lanka plans to acquire 6 FC-1s starting in 2013. It was reported in June 2013 that Argentina is interested in co-producing FC-1 locally. The latest image indicated that a tandem-seat trainer version (JF-17B?) was unveiled at the 2013 Paris Airshow, which has the electronic compartment removed from top of the vertial tailfin.


Top
 Profile  
 
PostPosted: Sun Jul 14, 2013 21:45 pm 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4402
This is a revised F-20 design with bifurcated air inlets to either a Russian or French designed engine. Cockpit has European avionics and will likely end up with a European radar (which will replace the NRIET KLJ-7 radar installed on the first 50 aircraft) and has western weaponry integration. And to be mainly built in the licensed country...

Software for the avionics has been written in C++ and is actually hackable... Not good for a military aircraft.

And not exactly a Chinese aircraft, since it is not serving in the PLAAF or PLANAF...

_________________
Hotshot
"FAF Shape Meister"
FAF/FA-2 Design team
TSH Member/Developer
VNFAWING.com Forum Administrator

VNFAWING Forums
VNFAWING Website

FA Futures/FA-2 is Still Being Worked On and Will Be Released...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 4 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 9 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group