Zephyr Net


Return to the Fighters Anthology Resource Center

Go to the VNFAWING.com Forums
It is currently Thu Dec 12, 2024 03:27 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 65 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next
Author Message
PostPosted: Wed Aug 13, 2003 02:43 am 
Offline
User avatar

Joined: Mon Apr 07, 2003 00:26 am
Posts: 1409
Location: Mid-Coast USA
lol I make all sorts of stuff out of it, I got a pile in the back yard, mill shavings off of Adamantium steel to be truthfull.

_________________
Fighting for justice with brains of steel

Let your anger be like the monkey which hides inside the piniata.


Top
 Profile  
 
PostPosted: Thu Aug 14, 2003 13:50 pm 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4437
Sounds like you have been reading to much X-Men!


Top
 Profile  
 
PostPosted: Thu Aug 14, 2003 16:03 pm 
Offline
User avatar

Joined: Sat Mar 15, 2003 17:12 pm
Posts: 1606
Location: NY, USA
CAG Hotshot wrote:
Not a problem! I kinda figures you would... Its the same reason I always knew Cent would turn it down also...

You guys like going your own ways...

No sweat!


The dark knight goes alone yes. That's why I fired Robin and told him to go away! Boy wonder my ass! Pain in the ass is more like it. Go Batman go!!!

LOL!!!

_________________
"Smile, AMRAAMs love you!"
"May the PATRIOTS down the FROGS!"
1Lt. Centurian57_76/369th

For all your FA needs and Game Remod 6 visit
Image


Top
 Profile  
 
PostPosted: Thu Aug 14, 2003 23:37 pm 
Offline
User avatar

Joined: Mon Apr 07, 2003 00:26 am
Posts: 1409
Location: Mid-Coast USA
my adamantium referance comes NOT from ink and pen, but from the best Sci-Fi movie ever Forbidden Planet

_________________
Fighting for justice with brains of steel

Let your anger be like the monkey which hides inside the piniata.


Top
 Profile  
 
PostPosted: Fri Aug 15, 2003 19:29 pm 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4437
Yes! I love that flick! Where its the power of the mans mind amplified by the alien technology and his own jealousy!!

Got to love it when Leslie Nielsen attempts to be a serious actor! (at least I think it was him, or was that 'mission to mars'?)


Top
 Profile  
 
PostPosted: Sat Aug 16, 2003 04:38 am 
Offline
User avatar

Joined: Mon Apr 07, 2003 00:26 am
Posts: 1409
Location: Mid-Coast USA
no that WAS officer Frank Drebbin alright LOL, did you notice that was the movie Gene Roddenbury copied for the original Star Trek !! "Did you think your apes brain could harness the power of the Krell!!" or something like that LOL. Story by William Shakespear ( The Tempest), special effects by Disney !!! LOL

_________________
Fighting for justice with brains of steel

Let your anger be like the monkey which hides inside the piniata.


Top
 Profile  
 
PostPosted: Mon Aug 18, 2003 12:19 pm 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4437
Gotta lvoe that 'classic' Sci Fi!


Top
 Profile  
 
PostPosted: Sat Sep 27, 2003 00:27 am 
Offline
User avatar

Joined: Mon Apr 07, 2003 00:26 am
Posts: 1409
Location: Mid-Coast USA
has anyone settled on "speed above" numbers they like? I'm using 16 for a GOOD RADAR, but it still seems a bit too good.

_________________
Fighting for justice with brains of steel

Let your anger be like the monkey which hides inside the piniata.


Top
 Profile  
 
PostPosted: Sat Sep 27, 2003 10:32 am 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4437
To be honest I have been sticking with your numbers... They seem to work well in limiting the AI aircraft from staying 'engaged' after you beam them..


BTW I saw Forbidden Planet just last week on the Sci Fi Channel!

LOL!


Top
 Profile  
 
PostPosted: Sat Sep 27, 2003 18:57 pm 
Offline
User avatar

Joined: Mon Apr 07, 2003 00:26 am
Posts: 1409
Location: Mid-Coast USA
I got "the Planet" on tape, so I can leer at Anne Francis whenever I like lol

_________________
Fighting for justice with brains of steel

Let your anger be like the monkey which hides inside the piniata.


Top
 Profile  
 
PostPosted: Sun Nov 29, 2020 14:15 pm 
Offline
User avatar

Joined: Fri Aug 29, 2003 19:11 pm
Posts: 2154
KAPTOR wrote:
Image

ok folks heres what I've been able to work out. First all these settings are for a radar set to "pulse doppler". It was tested at 10,000ft (doesnt really matter the settings go as compared to the radar position, as it should be) and was flown at speeds from 200kt to over 800kt(doesnt make as much diff as you might think) against targets running perpendicular (beaming off one wing) to the radar at speeds ranging from 200kt to 550kt, and targets running in on the test radar and retreating, at 200kt and 550kt, as well as targets moving diagonaly at oppsite directions (would looke like an X from above with the radar plane going right into the center crossing area) these targets are also moving from 200kt and 550kt.

first off I'll tell you that AWACS renders all the settings moot just like it ought to, so no worries on that.

second what works well and what doesnt and why.
MTI: works BUT the radar only picks up armor from a few miles(10 or so) even with the normal stock radar so it's not much help, cool but not practicle really since your only like 7 miles away from the armor when you find it.

Air to Air only: This works great, it works as perfect as you could want, no complaints at all on this one. (except the obviouse, it wont do AG work at all)

AG only: this also works well, with the only anomaly being that it WILL pick up planes that are coming straight at you or away from you, under certain conditions.

Mulit-Mode: this is the radar we're used to in FA, able to target air OR ground targets. I was HOPING to be able to have 1 radar on the plane that was the perfect AA radar and another radar that was the perfect AG radar. But even with a lot of fooling around with names and "secondary wep" and "required wep" I couldent get it to work. FA always seemed to take the AG radar as default and so no AA targeting.
The multi mode works ok, but you can cheat the crap out of it by just flying higher than the air targets. The "speed above" and "speed below" settings refer to the altitude of the plane with the radar, if you are above the other planes, then you get the filtering of the "speed below" numbers and since you HAVE to have that set to 0 in order to see ground targets ALL planes below you will jump onto the screen. So If you "roof it" you'll cheat out and see everything that is out there.

ok that's the theory here's the numbers
starting at the bottom

All Aspect- this is exactly the same thing as the IR All Aspect setting for missles , the higher the number the less visable an aproaching plane will be because it's tail is facing away from you.

Look Down-this is surprisingly useless! If you use it to degrade the radar as it "looks" below your altitude, then you loose the ground targeting! you can do the same thing with the "speed below" setting.

Minimum Range- nope it's supposed to be the "burn through" range ,I never saw it do anything except if you set it to 25(and ONLY 25) it will allow "burn through" at around 3 miles, well within viz range of anything.
now the good stuff.

Speed Below- this is a speed filter for all targets (yes ground targets too) BELOW THE ALTITUDE OF THE RADAR IN QUESTION, the higher the number the harder it is for a plane to show up on the radar. faster planes will show up before slower planes as you make the settings lower. If you want ground targets to show up you'll have to set this to 0.

Speed Above-This is a speed filter for all targets AT OR ABOVE THE ALTITUDE OF THE RADAR IN QUESTION, again the higher the settings the lower the chance of a plane showing up, with faster planes showing up first as you lower the settings.

Here are the numbers I found best to my likings, these numbers are posted as from the "Speed Above" box down to the "All Apsect" box

Air To Air radar only- 14,14,0,0,0. with these settings planes above and below your altitude will show up and dissapear depending on how close they are to being in a crossing(beaming) pattern to your radar. AI aircraft will loose thier lock and return to searching if the target planes beam them.

Air TO Ground radar only-239,0,25,0,100. No planes show up except for sometimes coming or going straight at you.

MTI Moving Target Indicator radar-239,1 or 2 or 3,0,0,100. No planes and no stationary ground targets until about 2 miles on the 1 or 2 setting, but moving armor will show at around the normal numbers 7 to 10 miles.

Multi Mode radar-14,0,0,0,0.a combo of the Air to Air and the AG, planes show and dissapear at or above you, but show up below you because of the AG filter numbers. AG targets show up as normal.

well this is what I've worked out "your milage may vary" LOL try them test them see what you would like to change, I've been up for 43 hours and am going to bed ZZZZZZZZZZZZzzzzzzzzzzzzzzzzzzzz



Old post and totally going to grave dig but for a reason.
Does anyone have any input on these values if - in fact - they hold true still?

_________________
Centurian


Top
 Profile  
 
PostPosted: Sun Nov 29, 2020 23:34 pm 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4437
Centurian57_369th wrote:
KAPTOR wrote:
Image

ok folks heres what I've been able to work out. First all these settings are for a radar set to "pulse doppler". It was tested at 10,000ft (doesnt really matter the settings go as compared to the radar position, as it should be) and was flown at speeds from 200kt to over 800kt(doesnt make as much diff as you might think) against targets running perpendicular (beaming off one wing) to the radar at speeds ranging from 200kt to 550kt, and targets running in on the test radar and retreating, at 200kt and 550kt, as well as targets moving diagonaly at oppsite directions (would looke like an X from above with the radar plane going right into the center crossing area) these targets are also moving from 200kt and 550kt.

first off I'll tell you that AWACS renders all the settings moot just like it ought to, so no worries on that.

second what works well and what doesnt and why.
MTI: works BUT the radar only picks up armor from a few miles(10 or so) even with the normal stock radar so it's not much help, cool but not practicle really since your only like 7 miles away from the armor when you find it.

Air to Air only: This works great, it works as perfect as you could want, no complaints at all on this one. (except the obviouse, it wont do AG work at all)

AG only: this also works well, with the only anomaly being that it WILL pick up planes that are coming straight at you or away from you, under certain conditions.

Mulit-Mode: this is the radar we're used to in FA, able to target air OR ground targets. I was HOPING to be able to have 1 radar on the plane that was the perfect AA radar and another radar that was the perfect AG radar. But even with a lot of fooling around with names and "secondary wep" and "required wep" I couldent get it to work. FA always seemed to take the AG radar as default and so no AA targeting.
The multi mode works ok, but you can cheat the crap out of it by just flying higher than the air targets. The "speed above" and "speed below" settings refer to the altitude of the plane with the radar, if you are above the other planes, then you get the filtering of the "speed below" numbers and since you HAVE to have that set to 0 in order to see ground targets ALL planes below you will jump onto the screen. So If you "roof it" you'll cheat out and see everything that is out there.

ok that's the theory here's the numbers
starting at the bottom

All Aspect- this is exactly the same thing as the IR All Aspect setting for missles , the higher the number the less visable an aproaching plane will be because it's tail is facing away from you.

Look Down-this is surprisingly useless! If you use it to degrade the radar as it "looks" below your altitude, then you loose the ground targeting! you can do the same thing with the "speed below" setting.

Minimum Range- nope it's supposed to be the "burn through" range ,I never saw it do anything except if you set it to 25(and ONLY 25) it will allow "burn through" at around 3 miles, well within viz range of anything.
now the good stuff.

Speed Below- this is a speed filter for all targets (yes ground targets too) BELOW THE ALTITUDE OF THE RADAR IN QUESTION, the higher the number the harder it is for a plane to show up on the radar. faster planes will show up before slower planes as you make the settings lower. If you want ground targets to show up you'll have to set this to 0.

Speed Above-This is a speed filter for all targets AT OR ABOVE THE ALTITUDE OF THE RADAR IN QUESTION, again the higher the settings the lower the chance of a plane showing up, with faster planes showing up first as you lower the settings.

Here are the numbers I found best to my likings, these numbers are posted as from the "Speed Above" box down to the "All Apsect" box

Air To Air radar only- 14,14,0,0,0. with these settings planes above and below your altitude will show up and dissapear depending on how close they are to being in a crossing(beaming) pattern to your radar. AI aircraft will loose thier lock and return to searching if the target planes beam them.

Air TO Ground radar only-239,0,25,0,100. No planes show up except for sometimes coming or going straight at you.

MTI Moving Target Indicator radar-239,1 or 2 or 3,0,0,100. No planes and no stationary ground targets until about 2 miles on the 1 or 2 setting, but moving armor will show at around the normal numbers 7 to 10 miles.

Multi Mode radar-14,0,0,0,0.a combo of the Air to Air and the AG, planes show and dissapear at or above you, but show up below you because of the AG filter numbers. AG targets show up as normal.

well this is what I've worked out "your milage may vary" LOL try them test them see what you would like to change, I've been up for 43 hours and am going to bed ZZZZZZZZZZZZzzzzzzzzzzzzzzzzzzzz



Old post and totally going to grave dig but for a reason.
Does anyone have any input on these values if - in fact - they hold true still?


I use many of these settings on aircraft in FAF... It makes the radars much more realistic.

_________________
Hotshot
"FAF Shape Meister"
FAF/FA-2 Design team
TSH Member/Developer
VNFAWING.com Forum Administrator

VNFAWING Forums
VNFAWING Website

FA Futures/FA-2 is Still Being Worked On and Will Be Released...


Top
 Profile  
 
PostPosted: Mon Nov 30, 2020 10:43 am 
Offline
User avatar

Joined: Fri Aug 29, 2003 19:11 pm
Posts: 2154
Cool. I've been using them and playing around with them but not too deeply with the radar just making sure nothing crashes.

_________________
Centurian


Top
 Profile  
 
PostPosted: Mon Nov 30, 2020 11:44 am 
Offline
User avatar

Joined: Tue Mar 11, 2003 18:54 pm
Posts: 4437
Centurian57_369th wrote:
Cool. I've been using them and playing around with them but not too deeply with the radar just making sure nothing crashes.


No they dont cause any crashes... They can render a radar useless though if you don't get them just right for the radar you are trying to model...

_________________
Hotshot
"FAF Shape Meister"
FAF/FA-2 Design team
TSH Member/Developer
VNFAWING.com Forum Administrator

VNFAWING Forums
VNFAWING Website

FA Futures/FA-2 is Still Being Worked On and Will Be Released...


Top
 Profile  
 
PostPosted: Mon Nov 30, 2020 23:23 pm 
Offline
User avatar

Joined: Fri Aug 29, 2003 19:11 pm
Posts: 2154
CAG Hotshot wrote:
Centurian57_369th wrote:
Cool. I've been using them and playing around with them but not too deeply with the radar just making sure nothing crashes.


No they dont cause any crashes... They can render a radar useless though if you don't get them just right for the radar you are trying to model...


No no I mean crashes like you load in the LIB but you put the wrong JT and don't upload it or you have an odd # of items in a bad way and the game CTE's.

_________________
Centurian


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 65 posts ]  Go to page Previous  1, 2, 3, 4, 5  Next

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 5 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum

Search for:
Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group